Power control photoelectric five secret to tell you that the maintenance of lamps and lanterns
Release date:2014-09-09 00:00 Source: Views:
After the first, to buy back the lamps and lanterns, don't busy installation, should read the installation instructions carefully look at the mark of lamps and lanterns and, according to the instruction of installation, use the lamps and lanterns again, otherwise there may be dangerous;
Second, according to the sign to provide light source parameters in a timely manner to replace aging tubes, found on both ends of the lamp is red, black or dark, jump arranged not bright, should be timely replacement bulbs, prevent unsafe phenomenon such as ballast burn out;
Third, in clean maintenance should pay attention to don't change the structure of the lamps and lanterns, also don't replace the parts of lamps and lanterns, at the end of the cleaning maintenance, should install lamps and lanterns is good according to the sample, don't packing, wrong parts of lamps and lanterns;
Fourth, the lamps and lanterns is in use and to strengthen the maintenance, to prolong its service life. Room of tubes should often use dry cloth to wipe, and pay attention to prevent moisture intrusion, lest in the long run, the phenomenon of the corrosion damage or leakage short circuit; Lamp shall be installed in the toilet, bathroom equipped with moistureproof lamp shade, otherwise will shorten the service life; In the lamp of the kitchen should pay special attention to prevent lampblack, because oil accumulation will affect the light illumination; Light transmittance of light color lampshade is good, but easy to stick ash, must diligently to wipe, lest affect light penetration degree; If the lamps and lanterns of nonmetal, can use wet cloth to wipe, in order to avoid dust accumulation, interfere with the lighting effect;
Fifth, do not frequently switch when use the lamps and lanterns, because lamp at the instant of the frequent start, through the filament current is greater than the normal work of electric current, the filament temperature rise sharply accelerated sublimation, which will be greatly reduced Its service life, so try to minimize the switch of lamps and lanterns. Special remind damp easily lead to rust, paint, lamps and lanterns will shorten the service life of lamps and lanterns. Therefore, moisture is the key to lighting maintenance, especially the lamps and lanterns of toilet, bathroom and kitchen stove headlights, all want to install the dampproof lampshades, in order to prevent moisture intrusion, avoid corrosion damage or leakage short circuit. Lamps and lanterns is best not to clean water, as long as can wipe with dry dishcloth touchs water, if not careful Touching the water to dry as far as possible, avoid by all means after turn on the light immediately with a damp cloth to wipe.
- Lighting experts wei photoelectric control: do the Chinese first-class supplier of LED lamps and lanterns
- The working principle of the solar street light
- Wei photoelectric control to teach you how to do the LED lamps and lanterns lighting sales?
- With high light is more appropriate?
- Street lamp of structure, the technical parameters of each component performance specifications