Street lamp of structure, the technical parameters of each component performance specifications
Release date:2014-09-09 00:00 Source: Views:
A, light pole:
1, light pole material type, select high-quality low-carbon steel Q235A from Shanghai baosteel, the silicon content of the steel is not higher than 0.04%, after a large bending machine bending forming, straightness error is less than 0.05%, of the light pole according to 36.9 m/s wind resistance grade 11 above design, anti seismic intensity of 8 level.
2, total X m high, diameter for Xmm, diameter for Xmm, wall thickness Xmm. At the bottom of the light pole with flange, flange mounting holes for ? X, through the anchor bolt is installed on the base. (X for the user to set parameters, or by the company according to the conventional configuration)
3, light pole welding method for automatic submerged arc welding, the welding is reliable, smooth surface, no obvious welding defects such as porosity, flash, bite edge, ultrasonic flaw detection, reaches the GBl1345 Ⅱ level standards.
4, hot dip galvanized steel rod embalmed using inside and outside, galvanized process after washing, phosphating, pickling, galvanizing, passivation process, such as galvanized layer surface is smooth and beautiful, luster, wrinkled skin, flow drop and zinc tumor, peeling, spot points, surface defects such as existence of Yin and Yang, the zinc layer thickness reach more than 86 um, meet the national standard GB/T13912-92, accord with the requirement of GB2694-88 zinc coating adhesion, anti-corrosion life more than 30 years.
5, light pole electrostatic pensu (color optional) after hot dip galvanized, plastic spraying before grinding to increase adhesion, strict control of curing time and temperature during the process of plastic spraying, plastic layer uniform, smooth, no pores. 1 ooum ≧ coating thickness, adhesion level GB9286-880, smooth surface, hardness ≧ 2 h.
Second, the lamps and lanterns:
1, the lamp body, lamp cover adopt aluminum alloy die casting, the surface by the electrostatic pensu processing, structure and corrosion resistance. Lamp shell anti-corrosion Ⅱ class; Protective class IP65; Prevent to get an electric shock level Ⅰ class. Comply with the safety requirements and test of lamps and lanterns "(GB7000.1-7000.6).
2, reflector made of high purity aluminum molding, the anodic oxidation electrochemical polishing processing, has the optical performance is stable, the characteristics of high reflectivity.
3, pervious to light cover made of high surface strength of toughened glass, high temperature above 200 ℃, high light transmittance, impact resistance.
4, reflector, toughened glass, and lamp holder with sealing adhesive as a body, the composition in bubble structure, good sealing performance, sealing ring resistance to high temperature above 250 ℃, IP66 sealing.
Three, electrical appliances:
The Shanghai philips 250 w high pressure sodium lamp, philips ballast, trigger, capacitance, philips, energy-saving lamps. (or the user's choice of other brands)
4, other technical parameters:
1, light pole height: plus or minus 5%
2, high beam arm (a long) : plus or minus 1%
3, the rated working voltage: 220 v (effective)
4, the rated insulation voltage: 500 v (effective)
5, rated frequency: 5 ohz
6, insulation resistance: 5 oomq ≧
7, dielectric strength, can withstand the communication 5 ohz, 15 ov (effective), and the experiment lasted lmin no breakdown or flashover voltage phenomena
8, power factor: CNS 30 ≧ 0.85
9, lamps and lanterns categories: protection against electric shock Ⅰ class
10, connection mode: single phase
11, efficiency of lamps and lanterns: ≧ 75%
12, protection grade: IP65
13, reflective materials: 3002-0 high purity aluminum plate
14, lampshade material: high transparency, strong curved tempered glass
15, lamps and lanterns: light distribution curve profile curve of light distribution
16, lamps and lanterns of all electrical appliances (ballast, trigger, capacitors) are installed in the lamps and lanterns
Five, the inspection standards:
Light pole testing standard: quality management manual, inspection, test specification file and the corresponding national standard and technology.
Inspection standards of lamps and lanterns: GB3037-91 and the corresponding national standard and industrial technical documents.
Street lamp light pole braided packing belt, lamps and lanterns packaging.
- The working principle of the solar street light
- Wei photoelectric control to teach you how to do the LED lamps and lanterns lighting sales?
- With high light is more appropriate?
- Power control photoelectric five secret to tell you that the maintenance of lamps and lanterns
- Lighting experts wei photoelectric control: do the Chinese first-class supplier of LED lamps and lanterns